urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 107

After pressing the "OK" button, the configuration associated with the project is applied on the plant site.
Correct transfer of the configuration is highlighted by a progress bar which turns green once the transfer
has taken place correctly, as shown below:
The red boxes indicate that the configuration transfer has taken place correctly, i.e.:
•
all devices in the system have the same configuration ("Devices with the same configuration" item);
•
the configuration status is aligned.
Once the configuration has been applied, the "Last modified" field is renamed to "Applied" and
shows the date and time in which the configuration was applied (or modified) to the system.
By pressing the "Apply changes" button, the error shown below is shown if CallMe Manager support
is enabled in the configuration but authentication to Urmet Cloud has not been carried out:
Figure 76: request for access to Urmet Cloud with CallMe Manager support enabled when deploying the configuration
MT124-032N
Figure 75: local configuration transferred to the system
107