urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 775

•
press the "Apply" button, save the configuration, and then distribute it.
At this point, after connecting the Servers 1060/1 to the IPerCom network, one of them will upgrade the
rest of the system to the same version to which it was upgraded. For subsequent upgrades, it will only be
necessary to upgrade the system Servers 1060/1. Any new devices connected to the system will be
automatically upgraded via Server 1060/1.
Devices/applications to be upgraded may also have firmware/software versions lower than IPerCom
version 2.1.1
To upgrade the devices/applications of an IPerCom system via Server 1060/1, they must be
reachable via the network from the same server.
MT124-032M
Figure 826: automatic update via IperCom server
775