urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 264

The "Description" field can be used to give a meaningful name to the activation you are creating.
The "Time Profile" drop-down menu can be used to associate a previously created time profile with the
activation rule. In this way, the rule will only be active within the selected time profile.
For example, having selected the auto-on event and given a meaningful name to the activation, the screen
that appears is as follows:
Figure 299: Partial activation creation
The "Add a New Output" button can be used to add one or more outputs to the activation. On the new
screen that appears, go to the topological node of the Relay Actuator, select the desired device, then
choose the output and set the respective command.
Figure 300: Selection of the desired device output
264 MT124-032N