urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 571

Main door settings
Used
Door Profile (#)
Main Door Name (#)
Door opening time (s) (#)
Door forced alarm (#)
Max Door Opening Time (s) (#)
Lock type (#)
Door under secret (#)
Time profile (#)
Remote Relay (#)
Remote Sensor (#)
MT124-032N
In this case, the item Yes enables the main door: the
following options are shown, marked with a hash mark (#).
The item No disables the main door.
Default value: Yes.
It allows you to associate a previously created access profile
to the main door in question. In this case the door
parameters are automatically filled in (except the name).
Default value: customised (the parameters must be filled in
manually).
Name to assign to the main door.
Pulse duration on the control relay. Default value: 3 s.
If selected, if the door is forced, the current event sends an
alarm to the Switchboard.
Maximum door opening time beyond which a warning of
opened door is sent to the Switchboard.
It allows you to choose the type of lock installed on the main
door (see note at the end of the configuration section of the
Call Module 1060/12-13-17-18)
If selected, by pressing the door opener button (from an
indoor station) it is possible to activate the electric lock of the
outdoor station only when the caller is in conversation or is
waiting for a response. If not selected, the door can also be
opened outside the call phase only from all the apartments
where the topological path detects the calling station. Default
value: selected.
It allows you to associate a time profile to the main door.
Access will be valid only within the selected time profile
(except for the residents of the apartments whose
topological path detects the calling station). Default value:
none.
It allows you to remotely control the relay that operates the
main door of the calling station. For further details, see
paragraph Remote relay functions, remote entrance hall
button and remote sensor.
It allows you to remotely control the sensor that signals that
main door has been left open. For further details, see
paragraph Remote relay functions, remote entrance hall
button and remote sensor.
Table 32: main door settings
571