urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 472

7.1.15 How to save the configuration
After creating the configuration, it is possible to save it through the "Project" tab of the configurator. The
screen displayed is as follows:
Figure 593: project sheet
Press the "Save" button to save the configuration.
The "Exit" button allows you to exit the configurator and return to the "Configuration" tab of IPerCom
Installer Tools. To transfer the configuration to the system, please refer to paragraph How to use IPerCom
Installer Tools for the configuration of a system where the most common use cases of the system
configuration are described.
472 MT124-032N