urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 307

Using the same input of the first Relay Actuator, the one named as "Garden Path Light Switch Input", it is
possible to switch on both the first and the second light (outputs linked to the second Relay Actuator). So it
is possible taking advantage of the second event linked to the programming of the input, that is the "Long
press" event, as shown in the figure:
Figure 360: second selectable event in monostable mode
The procedure is like what we saw before with the only difference that in the selection of the outputs both
outputs of the Relay Actuator 2 in "ACTIVATED" mode are added, as shown in the figure:
Figure 361: input associated with 2 outputs with long pressure command
MT124-032N 307