urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 391

7.1.10.6 C
USTOM NETWORK SETTINGS
The parameters are shown in the following figure:
The parameter meaning is as follows:
IP Range Minimum
IP Range Maximum
RTSP - Network Mask
RTSP - Default Username
RTSP - Default Password
For more details on how to use custom network settings, see
network settings in IperCom
If a static network setting is chosen for the IPerCom system, the IP address assigned to any
IPerCom device can be customized by choosing a value from those defined in the "Customized
Network Settings" section (for further details see
editable static IP addresses for IPerCom
MT124-032N
Figure 486: "System" tab - "Custom Network Settings"
Lower limit of the IP address range for the custom subnet you
are creating
Upper limit of the IP address range for the custom subnet you
are creating
Custom subnet mask you are creating
Username to view the RTSP streaming video from calling
stations (if enabled)
Password to view the RTSP streaming video from calling
stations (if enabled)
Table 21: meaning of the parameters in the "Custom Network Settings" section
system.
APPENDIX F1: How to use customized
APPENDIX F2: Custom network settings and
devices.
391