urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 105

Now it is necessary to press the "Set Date/Time" button. Press "Yes" on the relevant dialogue box, date and
time of the devices will be aligned with those of your PC. An additional dialogue box indicates that the
operation has been completed correctly:
When setting the date and time of the system, it is recommended to check that the date and time of
your PC are correct.
If the system is connected to a router with an Internet connection, the correct date and time are
already provided by the NTP (Network Time Protocol) service.
6.9.8 Transferring the system configuration
After configuring date and time, to apply the configuration to the system, simply go to the "Configuration"
tab. The screen displayed is as follows:
MT124-032N
Figure 72: date and time aligned with those of the PC
Figure 73: local configuration not yet transferred to the system
105