urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 194

The configuration creation (and thus the configurator) allows you to:
•
define the system topology,
•
add IPerCloud apartments (if present),
•
add the devices on the topological nodes of the system,
•
customize the system (assigning appropriate names to apartments, topological nodes, devices,
etc.),
•
define the address books,
•
create the activation rules,
•
create users (residents and non-residents),
•
set the access control,
•
configure system parameters and call forwarding.
All these points will be explained in detail in the following paragraphs.
7.1.1 Selecting the system topology (model) and the configurator structure
To create a new configuration, simply press the "Create" button in the "Configuration" tab. The following
screen is displayed:
In this screen it is possible to define the main data to create a new project (from which you can start to
create the system configuration). The data are the following ones:
•
site name;
•
installer password;
•
system model (or topology);
•
time zone.
194
Figure 206: system topology
MT124-032N