urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 778

C S
ALL TO ALL WITCHBOARDS
If an apartment (or a calling station) calls from address book all switchboards of the plant (each one with
the call forwarding function enabled) the only CallMe app that receives the call is the one linked to the
switchboard placed on the highest node of the topological structure.
Considering as an example a system with a topological structure like the one shown below:
Figure 829: Topological structure with several switchboards
the APT1 apartment (in red) can call all the switchboards in the system from address book, i.e. those on the
"Stair 1", "Stair 2" and "Block 1" nodes. These will ring simultaneously but if all are connected to their own
CallMe app, the only one that receives the call is that of the switchboard placed on the highest node, i.e. (in
the case shown in the figure) the CallMe app linked to the Switchboard application of the "Block 1" node
(in red).
If on the highest node there are several Switchboard applications (each with the call forwarding function
enabled), it is possible to establish through the configurator which CallMe app shall receive the call.
If there are 3 switchboards with the call forwarding function enabled on the "Block 1" node in the figure
above, the list of switchboards present on the topological node in question appears on the configuration
page of any of the 3 in the CallMe Priority section:
778 MT124-032N