Advertisement
Once the password has been entered and the "OK" button pressed, a screen opens where to select "CALL
MODULE": press "OK" again to access the following Call Module maintenance menu.
Figure 693: Call Module maintenance menu
By selecting "RESET ALL SETTINGS" and pressing the "OK" button, you will be asked to confirm the action.
Figure 694: Factory reset confirmation screen
Press the "OK" button for the last time to start the factory reset procedure: the device will restart to
complete the operation.
The reset to factory settings can be carried out also via the Ipercom Installer Tools application
(button
of the Diagnostic tab).
550
MT124-032N
Advertisement
Need help?
Do you have a question about the IPerCom 3.1.0 and is the answer not in the manual?
Questions and answers