urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 270

7.1.5.3 User recognition event
The user recognition event allows you to activate one or more Relay Actuator outputs after:
•
passing a valid proximity key of a resident or non-resident;
•
entering a valid door opener code of a resident or non-resident.
This function is available on the following devices:
•
Entry panel 1060/21 (passing a valid proximity key),
•
Call Module (passing a valid proximity key or entering a valid door opener code),
•
Modular Entry Panel with 1060/48 (passing a valid proximity key or entering a valid door opener
code),
•
Key Readers 1060/45 (passing a valid proximity key),
•
Key Readers 1060/86 (passing a valid proximity key).
In this way, for example, when a valid key is passed on a Key Reader at the entrance of a building basement,
it is possible to automatically open a garage up-and-over door or switch on the basement lights.
Once the "User Recognition" event has been chosen, the "Person" drop-down menu is displayed in the
activation rule construction screen, which allows you to select the resident or non-resident whose
proximity key and/or door opener code activates one or more Relay Actuator outputs, as shown in the
screen below:
The key and door opener codes are defined during the creation of the resident or non-resident (for further
details see paragraph User
270
Figure 308: user choice if the selected event is User Recognition
management).
MT124-032N