urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 125

6.14 System remote access
All the operations described above can also be carried out with the system in remote mode, that is without
being physically connected to the system with your PC. This operating mode is possible if the following
conditions are met on the system to which you need to connect remotely:
•
at least one of the following devices is present: Server 1060/1, Modular Calling Station with
1060/48, Entry Panel 1060/21, Entry Panel 1060/33, Entry Panel 1060/34, Video door phone 7''
7
VOG 1761/3x, Video door phone 5'' VOG
Video door phone MAX 1717/2x, 3x, 4x, Video door phone 7'' Basic 1741/1-2-3, Door phone Miro
1160/3;
•
the system is connected to the Internet;
•
the system has the remote access function enabled.
The remote access function can be configured in the "Maintenance settings" section of the "System"
tab of the configurator. For further details see the
Remote access is carried out via an already existing project with the same identifier as the (remote) plant
site to which you want to connect.
This represents the most common use case: the installer, connected to the system with his PC, defines the
configuration of the system itself; the relevant project remains available on IPerCom Installer Tools for any
modifications, even remotely, by the installer himself.
Authentication on Urmet Cloud is mandatory, so that the installer can remotely access a system.
How to remotely access a system is now described in more detail.
MT124-032N
5+
1761/15-16-18-19, Video door phone 5'' VOG
"Maintenance Settings" paragraph.
5
1761/6,
125