urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 388

7.1.10.4 Call divert settings
The parameters are shown in the following figure:
The parameter meaning is as follows:
Call Divert
Call Diversion Waiting Time (s)
In addition to the configurator, the call divert function must also be enabled on the video door
phone apartment stations and IPerCom Client application. For further details, see the user's
manuals available at www.urmet.com.
The call divert function cannot be set on the Miro door phone 1160/3 or video door phone 1761/6.
The call diversion function can only be set on the master video door phone (or IPerCom Client
application) in the apartment.
From the CallMe app it is not possible to call an apartment station on which the call forwarding
function has been set up.
388
Figure 484: "System" tab – "Call Divert Settings"
If enabled, it allows diverting the direct call to an apartment
station (including IPerCom Client application) towards relevant
switchboards or towards the contacts in the address book.
Default value: enabled.
Waiting time after which the call is diverted to another
apartment station. Immediate diversion is also possible. Default
value: 30s.
Table 19: meaning of the parameters in the "Call Divert Settings" section
MT124-032N