urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 468

The main features of the CallMe app are listed below:
•
call forwarding to the apartment on smartphone/tablet;
•
auto-insertion on calling stations;
•
intercom call to apartment stations;
•
sending activation commands;
•
door and gate opening even outside of the call.
Auto-insertion on RTSP cameras is not supported by CallMe app.
For a detailed description of all the features of the CallMe application, please refer to the relevant
which can be consulted on the website www.urmet.com.
The QR Code present on the document sent by the administrator is disposable, once scanned it will
no longer be usable. It is necessary to carry out the entire service activation procedure after the
scan. If the procedure is interrupted, the administrator will have to generate a new document with a
new QR code to allow the activation of the service
Once the call forwarding function has been configured for the various apartments and Switchboard
applications, it is of fundamental importance not to redo a new system configuration from scratch
(even if the topology is the same): if this were the case, the procedure seen above to associate the
smartphone/tablet to apartments/Switchboard applications is to be repeated.
468
booklet
MT124-032N