urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 348

A screen page opens displaying the various access profiles loaded into the system to be associated with
non-residents, or a list of doors that can be opened, if necessary, during a certain time frame:
Figure 426: selection of access profiles for non-residents
Access profiles can be created in the "Access Control" tab (see section Access control).
To associate an access profile to a non-resident, press the relevant name: the access profile will move from
the list of available profiles to that of the selected profiles. To delete the association, press the same item in
the list of selected profiles.
In conclusion, the creation of non-residents allows giving access (through Proximity Keys or Door Codes) to
external personnel only at the relevant access points with or without time limit. Once you have entered for
example 2 non-residents, the list of non-residents in the configuration will appear as shown in the figure:
Figure 427: List of non-residents
348 MT124-032N