Download Print this page

urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 167

Advertisement

To display the System Logs saved locally (backup), the same System Logs must have been displayed at least
once in online mode: the backup, in fact, is created as soon as the static System Logs operation mode is
activated.
Every time the "Open System Logs" button is pressed (except the first time) in static mode, the local System
Logs is downloaded again. To prevent the previous one from being automatically overwritten, the following
message is shown:
Figure 164: request to overwrite the local System Logs
If the "Yes" button is pressed, the previous local System Logs is overwritten and the static operation mode
is enabled. If "No" is pressed, the static operation mode is not enabled.
If the System Logs has never been opened in static mode, if you try to enable it only with the project open,
the following screen is displayed:
Figure 165: "System Logs" tab (without connection to the system) if the System Logs has never been opened in static mode
Below is explained in more detail which information is tracked in the System Logs and how to filter it.
MT124-032N
167

Advertisement

loading
Need help?

Need help?

Do you have a question about the IPerCom 3.1.0 and is the answer not in the manual?