urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 184

As written in the paragraph
presence of misaligned devices appears on the video door phones, Switchboard, IPerCom Client and
IPerCom Installer Tools applications. The message is like the one reported below:
The fastest way to bring the system back to normal operation involves:
•
disconnect unaligned devices,
•
press the "OK" button in the above window relating to IPerCom Installer Tools,
•
go to the "Maintenance" tab,
•
press the "Reboot all devices on site" button.
In this way all the devices in the system restart and thus avoid having to manually restart each individual
video door phone, a very difficult operation in medium or large sized systems.
The message shown in the figure disappears automatically once the not-aligned devices are
disconnected but it may be necessary to wait up to 30 minutes for this to happen on all the video
door phones.
184
Device/application firmware
Figure 192: Presence of devices with UPTK versions not aligned
upgrade, a warning message indicating the
MT124-032N