urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 95

Then, after creating and saving a local configuration, the following screen is displayed:
Figure 61: "Configuration" tab after creating the local configuration
The newly created configuration file is named userconfig.ccf and the date of last modification and the date
of creation (red box) are displayed on this file.
The data in the blue boxes are not assigned a value because you are not connected to any system yet: their
meaning will be explained below.
The "Edit" button allows editing the configuration file just created: the configurator opens again, and it is
possible to make the desired modifications and close the configurator.
Now, by pressing the "Site" tab, the "System ID", "Created on" and "Modified" fields are assigned a value as
a configuration file associated to the project is present and the "System ID" value is linked to the creation
date of this file. The "Configuration available" field is also selected as there is a local configuration
associated with a project.
At this stage the name of the project displayed at the top of the left panel of IPerCom Installer Tools (see
Figure 58) is replaced by the name of the site, as this field is available (it was filled in following the
creation and saving of the configuration).
MT124-032N 95