urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 231

By choosing the "ENABLED" item, the selected apartment becomes an IPerCloud apartment. This is
highlighted by the relevant icon in the left navigation module (red arrow):
The "Call forwarding URI" item is no longer visible as the use of the CallMe Manager application is
required to configure the IPerCloud apartment and the parameter in question can only be set if this
application does not It's requested.
In the presence of at least one IPerCloud apartment on the configurator, the CallMe Manager
Support item is automatically enabled, if it was previously disabled.
Enabling the IPerCloud mode can be set not only by the apartment nodes, but also by the higher nodes
(site, block, stair, floor) with the advantage that all the apartments of the relevant topological group
acquire this mode. For example, to set the IPerCloud mode from a "block" node, simply press the relevant
"Set" button, as shown in the figure:
MT124-032N
Figure 258: apartment in IPerCloud mode
Figure 259: setting up an IPerCloud node
231