urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 316

The scrolling menus in the figure above allow you to define the start and end of validity of the time profile
for each day of the week. For example, if you want to activate a validity for Monday from 8:00 to 12:00, the
result is as follows (after pressing the "OK" button):
Figure 376: Time profile created for a day of the week
The "Copy" and "Paste" buttons allow you to quickly copy the time interval just created for all the other
days of the week. You can press the "Copy" button on Monday which will enable the "Paste" buttons on the
other days to do this. The following page will appear:
Figure 377: Time profile created for the entire week
The ''Clean'' button allows you to delete all previously created time intervals for one day of the week.
The button allows you to delete a single time interval created.
316 MT124-032N