urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 752

Enabling the RTSP streaming during calls from Modular Calling Station with 1060/48
1. Access the configuration page of an IPerCom calling station (for example the Modular Calling
Station with 1060/48) via the configurator;
2. Enable the "RTSP In-Call Stream" item by selecting the relevant box:
Figure 803: enabling of the RTSP streaming from the configurator for the Modular Entry Panel with 1060/48
3. Press "OK" to save the configuration then apply the configuration.
Some of the parameters shown in the previous figure are predefined in the "System" tab in the "Custom
Network Settings" section, as shown below:
752
Figure 804: custom network settings
MT124-032N