urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 607

Main door settings
Used
Door Profile (#)
Access Name (#)
Gate Opening Time (s) (#) (§)
Forced Door Alarm (#)
Max Door Opening Time (s) (#)
Lock type (#)
Door Under Secret (#)
Time Profile (#)
Remote Relay (#)
Remote Sensor
MT124-032N
The item "Yes" enables the main door: in this case the
following options are shown, marked with a hash mark (#).
The item "No" disables the main door.
Default value: "Yes".
This allows you to associate a previously created door profile
with the concerned main door. In this case, the door
parameters are automatically compiled (besides the name).
Default setting: Custom (parameters must be compiled
manually).
Name to assign to the main door.
Pulse duration on the control relay. Default value: 3s.
Allowed values: from 1s to 90s.
If selected, if the access is forced, the concerned event sends
an alarm to the Switchboard.
The maximum opening time of the door after which an
open-door notification is sent to the Switchboard.
It allows you to choose the type of lock installed on the main
door (see note at the end of the configuration section of the
Call Module 1060/12-13-17-18.
If selected, by pressing the door opener button (from an
indoor station) it is possible to activate the electric lock of
the outdoor station only when the caller is in conversation
or is waiting for a response. If not selected, the door can also
be opened outside the call phase from all the apartments
where the topological path detects the outdoor station.
Default value: selected.
Allows you to associate a time profile with the main door.
Access will only be valid within the selected time profile.
Default setting: none.
It allows you to remotely control the relay that operates the
main door of the Entry panel. For further details, see
paragraph Remote relay functions, remote entrance hall
button.
It allows you to remotely control the sensor that signals that
main door has been left open. For further details, see
paragraph Remote relay functions, remote entrance hall
button and remote sensor.
Table 62: Main door settings
607