Download Print this page

urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 397

Advertisement

N
UMERIC ADDRESSING TYPE
In numeric addressing to call an apartment from Call Module or Modular Calling Station with 1060/48 or a
Switchboard, a numeric code must be entered by the keypad. You can set this code in automatic or manual
mode (see paragraph
Global Settings
for further details). In the first case, for each apartment the
"Settings" tab of the "Topology" tab appears as shown below:
Figure 490: "Settings" screen for numeric addressing
As you can see, the "Numeric Code" field is automatically filled in by the configurator. If, on the other hand,
you choose the manual mode, the numeric code must be filled in by the installer.
Numeric codes with a maximum of 6 digits can be entered from the configurator.
When typing the code from the alphanumeric keyboard, the on the left zeros can be omitted.
MT124-032N
397

Advertisement

loading
Need help?

Need help?

Do you have a question about the IPerCom 3.1.0 and is the answer not in the manual?

Subscribe to Our Youtube Channel