urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 638

The following table shows the meaning of the fields for RTSP Camera.
General Settings
Name
MAC Address
Device Code
Location
RTSP streaming
settings
URI for Streaming
IP Address
Port
Stream
Username
Password
To set the IP address it is recommended to follow what is reported in
customized network settings in IperCom
video door phones, follow what is reported in
video door phones.
638
Name to assign to the RTSP Camera.
MAC address associated with the RTSP Camera.
Value cannot be changed.
Position in the system topology: it is possible to move the device to
another topological node by pressing the "Move" button.
Full URI video streaming. Read-only value.
It is automatically compiled by compiling the fields below, respecting
the following syntax:
rtsp://[<Username>:<Password>@] <IP Address>:<Port>/<Stream>
The part between square brackets may not be present if the user
name and password are not defined.
Camera IP address.
RTSP stream port.
Address of the stream.
User name to access the camera.
User password for access to the camera.
Table 90: general settings for RTSP Camera
system. For RTSP cameras supported by IPerCom system
APPENDIX W1: RTSP Cameras supported by IPerCom
APPENDIX F1: How to use
MT124-032N