urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 59

6.4 Starting the Launcher
Once the search for a more up-to-date version and the possible upgrade step have been completed, the
following ''launcher'' is displayed:
Depending on the selected item, the drop-down menu of the above screen allows you to
•
detect which version of IPerCom is installed on a system (if the PC on which the IPerCom Installer
Tools application is installed is connected to the system);
•
directly select an IPerCom version (among those officially released) with which you want to work.
Depending on the detected or selected version, it is possible to launch (through the same screen shown
above) the corresponding version of IPerCom Installer Tools so that the configuration file of a project
distributed to the system site is compatible with the IPerCom version installed on the system. In this way it
is possible to choose from a single application which version you want to work with (thus avoiding having
different versions of the same application installed on the same PC)
The 2 operating modes are now described in more detail.
6.5 Automatic detection of the IPerCom version
To detect the IPerCom version of a system to which the PC is connected, it is possible to use the "Auto-
detect (from live site)" item:
MT124-032N
Figure 13: launcher di IPerCom Installer Tools
Figure 14: detect the IPerCom version from the site
:
.
59