urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 123

In this case the "Create" button is frozen because any local configuration created would have a different
identifier from the one already present on the system site and could not be transferred.
The quickest way to restore a project configuration compatible with the system site configuration is to
press the "From system" button. The following screen is displayed:
Figure 99: importing from system configuration
After selecting the only available configuration on the system, the "Import" button is enabled. Press the
"Import" button to import the keys and the system configuration, as already described above.
Press the "OK" button, the "Site" tab restores the alignment:
Figure 100: "Site" tab with project and system site aligned
The procedure of creating a new project without any configuration is mandatory if you want to change the
configuration of a villa kit in IPerCloud mode with a 1060/21 entry panel. In this case, however, after having
connected to the system and downloaded the configuration, to modify it it is necessary to set an installer
password from the "Security" tab (see paragraph Security). With this password you can then access the
configuration for any changes.
MT124-032N 123