urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 506

Figure 638: Adding a new device on Android tablet
By pressing this button, the "Barcode Scanner" app will start (if it is not in the system, the system will
automatically prompt to install it through Google Play Store). When you open the app you have to position
the camera in front of the QR Code of the device and wait for the scan and the automatic filling in of MAC
address:
Figure 639: Automatic entering of the MAC address from the scanned QR Code
The device addition will be completed as usual after pressing "OK".
A similar procedure is to be followed to add all other devices installed in the system.
Once the devices are added to the configuration or in any case before distributing the configuration on the
system, you will need to save the configuration on the SD card.
506 MT124-032N