urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 229

If the 1060/1 Server is added to the configuration but is not physically installed on the system, during the
saving phase the configurator allows you to save the configuration but when you try to apply it via IPerCom
Installer Tools the following message is shown (within 5 minutes):
Figure 253: message on IPerCom Installer Tools in the presence of Server 1060/1 added on the configurator but not present on the system
7
In addition, the VOG , VOG
show a screen like the one below:
Figure 254: message on MAX, VOG
Calling stations equipped with displays show a screen indicating that the device is not configured.
It is therefore necessary to connect physically at least one 1060/1 Server to the system and add it as a
device to the system configuration. If one or more Server 1060/1 are connected to the plant but not
configured, the following message is shown (with or without IPerCloud apartments):
MT124-032N
5+ 5
, VOG , MAX video door phones, Switchboard and IPerCom Client applications
7 , VOG 5 , VOG 5+ , Switchboard and IPerCom Client in the presence of Server 1060/1 added on the configurator but
not present on the system
Figure 255: message in case of Server connected to the system but not configured
229