urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 438

Figure 543: correct activation of the call forwarding function on video door phones 1761/6
As a final step, it is necessary to check that the "Remote" mode operating icon appears on the master video
door phone as shown below depending on the different types of video door phone models:
Figure 544: "Remote" mode operation icon on video video door phones 1717/xx - 1761/3x - 1741/x
On any slave video door phones, the "Remote" mode operating icon is only shown at the top right.
If operation in "Remote" mode has already been activated and deactivated previously on the video
door phone, the relevant icon must be activated manually: it is necessary to press the icon
(bottom right) only on the master video door phone and then select the icon
438
..
MT124-032N