urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 152

6.15.2 Security
The "Security" tab allows you to:
•
modify the installer password, (for example if the administrator decides to change installer or if the
installer can no longer remember his/her password);
•
block the system, that is enter an administrator password after the configuration step is finished.
As described in paragraph
•
installer level, which provides a password that the installer chooses when creating the project and
that is requested every time you want to access the system configuration;
•
administrator level, which provides for a password that the administrator chooses to secure the
system when the configuration step is finished.
Press the "Security" tab, the screen that is displayed is as follows (with system unlocked):
152
"Security level of an IPerCom
Figure 141: "Security" tab
system", there are two access password levels:
MT124-032N