urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 557

10.10 Factory reset of the Entry panel 1060/33-34
To perform the factory reset of the Entry panel Ref. 1060/33-34 carry out the following operations in
sequence:
•
switch the device off;
•
for the Entry panel 1060/33: press and hold the first call key (the top key) and the hall key;
•
for the Entry panel 1060/34: press and hold the "up arrow" key and the hall key;
•
switch the device on;
•
do not release the keys until the device performs the following steps in sequence:
-- 8 flashes in sequence of the key LEDs,
-- camera LEDs turning on and off,
-- flashes in sequence of the key LEDs,
-- camera LEDs turning on and off.
Now, you can release the 2 keys and the factory reset function is implemented and the device reboots.
The reset to factory settings can be carried out also via the Ipercom Installer Tools application
(button of the Diagnostic tab).
MT124-032N
Figure 702: Entry panel 1060/33 (on the left) and 1060/34 (on the right)
557