urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 178

6.15.7 Maintenance
The "Maintenance" tab is useful if it is necessary to:
•
switch from a system with server to a system without server;
•
import a new configuration to the system;
•
restart all system devices (useful function if one or more devices (not in configuration and not
aligned with the IPerCom version of the system) are connected to the system;
•
enable or disable access to IPerCom system configuration from MAX, VOG
phones.
These operations are explained in more detail below.
S
WITCHING FROM A SYSTEM WITH SERVER TO A SYSTEM WITHOUT SERVER
The transition from a system with Server 1060/1 to one without Server 1060/1 is possible only if:
•
the number of devices is less than or equal to 1000,
•
the number of apartments is less than or equal to 1000,
•
the total number of users is less than or equal to 1000.
Otherwise, for the correct functioning of the system, the presence of at least one 1060/1 Server is required.
In case of system with 1060/1 Server, the "Maintenance" tab of IPerCom Installer Tools appears as shown
below:
As you can see, the system works in "server" mode.
178
Figure 183: "Maintenance" tab - operation with server
7
or Basic video door
MT124-032N