urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 223

In a very active system, where several paths have been configured, each with its own activation time, the
relay opening times may overlap, for example:
•
Path 1
o From the main entry panel to the lift.
o 1st floor
o Activation time: 5 minutes.
•
Path 2
o From the secondary entry panel to the lift.
o 2nd floor
o Activation time: 7 minutes.
•
Path 3
o From the proximity reader to the elevator.
o 5th floor
o Activation time: 10 minutes.
A visitor makes a call from the main entry panel to an apartment on the 1st floor (Path 1). When the
apartment station of the apartment opens the door, a command is sent to the lift interface that enables the
relevant relay(s) for 5 minutes. If within 5 minutes a call is made from the secondary entry panel to an
apartment on the 2nd floor (Path 2) and in the meantime a door is opened through the proximity reader,
for example in the garage, by a 5th floor resident (Path 3), the lift interface will ensure the activation time
of the first call (Path 1) and at the same time, from the moment the lift interface has received the relay(s)
activation command, the activation time of the second and third call (Path2 and Path 3).
If there is a Switchboard 1060/41 connected to a PC using the SwitchBoard application, it is necessary to
create a path between the two devices. In the path settings the Switchboard does not have the Activation
time parameter to configure as, for example, the call modules, because it is the switchboard operator who
decides the activation time when enabling the output manually. For more details, see the
manual.
MT124-032N
Switchboard user
223