urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 579

Main door settings
Used
Door Profile (#)
Main Door Name (#)
Door Opening Time (s) (#)
Door Forced Alarm (#)
Max Door Opening Time (s)
(#)
Lock type (#)
Door Under Secret (#)
Time Profile (#)
Remote Relay (#)
Remote Sensor (#)
MT124-032N
The item Yes enables the main door: in this case the following
options are shown, marked with a hash mark (#).
The item No disables the main door.
Default value: Yes.
It allows you to associate a previously created access profile to
the main door in question. In this case the door parameters are
automatically filled in (except the name). Default value:
customised (the parameters must be filled in manually).
Name to given to the main door.
Pulse duration on the control relay. Default value: 3 s.
If selected, if the door is forced, the current event sends an
alarm to the Switchboard.
Maximum door opening time beyond which a warning of
opened door is sent to the Switchboard. Default value: 60s.
It allows you to choose the type of lock installed on the main
door (see note at the end of the configuration section of the
Call Module 1060/12-13-17-18.
If selected, by pressing the door opener button (from an indoor
station) it is possible to activate the electric lock of the outdoor
station only when the caller is in conversation or is waiting for a
response. If not selected, the door can also be opened outside
the call phase from all the apartments where the topological
path detects the External unit. Default value: selected.
It allows you to associate a time profile to the main door. Access
will be valid only within the selected time profile (except for the
residents of the apartments whose topological path detects the
Call Module). Default value: none.
It allows you to remotely control the relay that operates the
main door of the external unit. For further details, see
paragraph Remote relay functions, remote entrance hall button
and remote sensor.
It allows you to remotely control the sensor that signals that
main door has been left open. For further details, see paragraph
Remote relay functions, remote entrance hall button and
remote sensor.
Table 38: main door settings
579