urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 166

When the System Logs is displayed for the first time in static mode, in the "Site" tab the item "System logs
available offline" is selected (red arrow):
Figure 162: "Site" tab with System Logs saved locally
If this item is selected, the next time IPerCom Installer Tools is started it is possible to consult the system
logs by simply opening the project, even if you are not connected to the system (and therefore even if the
configurations of the project and site are not aligned). In this case the "System Logs" tab looks like this:
Figure 163: "System Logs" tab with System Logs saved locally
In this case, the source is not the Server 1060/1, but the backup of the System Logs automatically saved on
your PC the first time it was displayed in static mode and updated every time the button was pressed. In
this case the "Open System Logs" button shows the same screen as before, with the only difference that
the System Logs cannot be updated in real time with the button, which in fact is frozen.
In this case it is possible also to export the System Logs to a csv file.
166 MT124-032N