urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 73

Pressing the ''Urmet Cloud'' tab displays the screen shown below:
Figure 35: screen of the Urmet Cloud tab after cloud authentication
The Urmet Cloud section (red box) presents the "Cloud logout" and "Edit profile information" buttons,
which respectively allow you to exit Urmet Cloud and modify the data entered when creating the account.
The IPerCloud Management section instead concerns more directly the configuration of the IPerCloud
mode and is explained in detail in the next paragraph.
6.7.1.1 Pre-activation license bundle and pre-activation license bundle history
The IPerCloud Management section (blue box) presents the buttons "Pre-Activate license bundle" and
"License bundle pre-activation history": both functions are useful for configuring an IPerCom system in
IPerCloud mode.
Pressing the '' Pre-activate license bundle'' button, the following screen opens:
Figure 36: license bundle pre-activation
In the ''License bundle serial number'' field it is necessary to enter the serial number of the license bundle
for pre-activation by the installer. The number is shown on the license card with the abbreviation "S/N" as
shown in the following example figure:
MT124-032N 73