urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 386

The meaning of the single items is shown in the following table:
Call forwarding
Call forwarding Cloud URI
Call Forwarding Quality
SRTP protocol (if available)
Call Forwarding URI on Max
CallMe Manager Support
IPerCloud test Mode
Show only the competence
apartments on the CallMe
associated with Switchboards
386
If enabled, it allows call forwarding on smartphone/tablet.
Default value: enabled.
SIP server where to register the user for call forwarding on
smartphone/tablet. Default value: sip.urmet.com
Video quality of the call forwarded to a smartphone/tablet.
Allowed values: "High", "Medium", "Low". Default value:
"High".
If enabled, it allows to enable the SRTP protocol on all calling
stations (except the 1060/12-13-17-18-23 Call Module), all
apartment stations and apps Switchboards and IPerCom
Client: in this way calls to the CallMe application and from the
CallMe application are encrypted. Default value: disabled.
If enabled, it allows modifying the username registered on the
SIP server for call forwarding on smartphone/tablet from the
7
MAX, VOG or Basic video door phones. If not enabled, the
user's name is the one defined by the configurator in the
apartment settings. The following parameter is visible in the
settings only if the parameter "CallMe Manager support" is
disabled.
If enabled, it allows you to activate the call forwarding
function through the support of the CallMe Manager app.
Furthermore, if enabled, it is not possible to access the
configuration and modify it from the MAX, VOG
video door phones connected to the system (and configured).
Default value: disabled (the value automatically switches to
enabled if one or more apartments are set in IPerCloud mode
during the configuration). The field can be modified only if the
configurator is started from IPerCom Installer Tools. On the
contrary, if it is started by the video door phones that
integrate it, the field cannot be modified.
If enabled, this mode allows you to check the correct
functioning of the IPerCloud system through a test apartment
(IPerCloud). To correctly execute the test mode, see the
IPerCloud Test Mode
field can be modified only if the configurator is started from
IPerCom Installer Tools and if CallMe Manager support is
enabled. On the contrary, if it is started by the video door
phones that integrate it, the field cannot be modified.
If the item is enabled, only the competence apartments will
be visible on the CallMe app linked to the Switchboard
application, that is the apartments that are placed in the
topological group of the Switchboard application. However, if
the item is disabled, all the apartments in the system will be
visible. Default value: enabled.
Table 18: meaning of the parameters in the "Call Forwarding Settings" section
paragraph. Default value: disabled. The
7
or Basic
MT124-032N