urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 218

By entering an allowed value and pressing ''OK'', the last 7 dip-switches in the image below are
automatically positioned on the right position, to represent the previously entered number in binary
format. Having entered 100, the figure shown below appears:
Figure 241: Binary code of the entered code
It is also possible to act directly on the dip-switches (pressing on the related image) to set the desired
2Voice code.
The setting of the dip-switches must be reported on apartment stations of the 2Voice riser column.
The first dip-switch (starting from the left) must not be modified as regards the setting of the physical code
of the 2Voice users.
For details, follow the instructions in the 2Voice technical manual (available from the website
www.urmet.com).
2Voice apartments cannot be set in IPerCloud mode.
218 MT124-032N