urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 205

The configurations are created and edited using the IPerCom Configurator application, also known as the
configurator.
The configurator consists of three main components, shown in the following figure:
It is possible to see:
•
an upper bar (in yellow), which allows accessing to the main functions through the following items:
▪
"Project", to set the basic information about the project (name, installer password, etc.);
▪
"Topology", to change the system topology, add devices, create address books and set
activations;
▪
Users", to add residents and non-residents, as well as users enabled to access the
Switchboard application, "Access Control", to set the rules to access the system;
▪
''Building Automation'', to define the activation rules of Relay Actuator of the system;
▪
"System", for the system global settings;
▪
"Search", to perform a fast search among the system elements.
•
a navigation module (in red), to view and add/modify/remove system topological nodes: blocks,
stairs, floors, and apartments;
•
a context module (in blue), to set the configuration parameters.
MT124-032N
Figure 221: Main components of the configurator
205