urmet domus IPerCom 3.1.0 System Technical Manual For The Installer page 671

Speech synthesis language selection
The language is selected by means of the rotary selector (5) in the rear part of the module as shown in the
following table.
Rotary selector position
1
2
3
4
5
6
0 – 7 – 8 – 9
To make the programming changes active, power supply to the device must be disconnected and
powered up again.
Speech synthesis volume adjustment
Volumes are calibrated by default so not to require adjustments in most cases. Use a screwdriver to adjust
the volume, if required.
Technical specifications
Voice message acoustic pressure: ............................................................................................. 80 dB a 10 cm
Working temperature range: ....................................................................................................... -25 ÷ 40° C
MT124-032M
Associated language
Italian (default)
English
Franch
German
Spanish
Dutch
Vocal messages deactivated
671