Lldp Med Network-Policy (Interface); Lldp Med Location - Alcatel OmniStack LS 6248 User Manual

application defined for this network policy. Available application names are:
voice, voice-signaling, guest-voice, guest-voice-signaling,
softphone-voice, video-conferencing, streaming-video,
video-signaling.
• vlan id — VLAN identifier for the application.
• vlan-type — Specifies if the application is using a 'tagged' or an 'untagged'
VLAN.
• up priority — User Priority (Layer 2 priority) to be used for the specified
application.
• dscp value — DSCP value to be used for the specified application.
Default Configuration
No network policy is defined.
Command Mode
Global Configuration mode
User Guidelines
Use the lldp med network-policy interface configuration command to attach a
network policy to a port.

lldp med network-policy (interface)

The lldp med network-policy Interface Configuration (Ethernet) mode command
attaches a LLDP MED network policy to a port. To remove an LLDP MED network
policy from a port, use the no form of this command.
Syntax
lldp med network-policy number
no lldp med network-policy number
Parameters
• number — Network policy sequential number.
Default Configuration
No network policy is attached.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
There are no guidelines for this command.

lldp med location

The lldp med location Interface Configuration (Ethernet) mode configures the
location information for the Link Layer Discovery Protocol (LLDP) Media Endpoint
Discovery (MED) for an interface. To delete location information for an interface, use
the no form of this command.
4
LLDP Commands
335