Show Dot1X Bpdu; Show Spanning-Tree - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
•
bridging
packets would be bridged.
Default
Filtering
Command Modes
Global configuration
Usage Guidelines
According to IEEE802.1 standards the 802.1X BPDUs should never be
forwarded - The 802.1X BPDUs should be handled by the software in case
802.1X is enabled on the ingress port, or discarded in all other cases.
This feature enables to bridge 802.1X BPDUs packets as data packets.
The feature can be enabled only when 802.1X is globally disabled (by the no
dot1x system-auth-control global configuration command). If the port is
disabled for 802.1X but 802.1X is enabled globally, 802.1X BPDUs would
always be discarded.

show dot1x bpdu

Use the show dot1x bpdu EXEC command to display the 802.1x BPDU handling
when 802.1x is globally disabled.
Syntax
show dot1x bpdu
Command Modes
EXEC
Usage Guidelines
There are no usage guidelines for this command
Examples
Switch# show dot1x bpdu
802.1X BPDU packets are trapped for the 802.1X protocol.
Switch# show dot1x bpdu
802.1X BPDU packets are filtered.
Switch# show dot1x bpdu
802.1X BPDU packets are bridged.

show spanning-tree

The
show spanning-tree
configuration.
564
— Specify that when 802.1x is globally disabled, 802.1x BPDU
Privileged EXEC mode command displays spanning-tree