Bridge Address - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface
Command
show bridge
multicast
address-table statict
show bridge
multicast filtering
show ports security Displays the port-lock status.
show ports security
addresses

bridge address

The
bridge address
MAC-layer station source address to the bridge table. To delete the MAC address,
use the form of this command.
no
Syntax
bridge address
port-channel-number} [
]
secure
no bridge address
Parameters
• mac-address — A valid MAC address.
• interface — A valid Ethernet port.
• port-channel-number — A valid port-channel number.
• permanent —
command.
•
delete-on-reset
•
delete-on-timeout —
expired.
•
secure
learning (
when the port is in the learning locked mode.
Default Setting
No static addresses are defined. The default mode for an added address is
.
permanent
Command Mode
Interface Configuration (VLAN) mode
Command Usage
Using the
no
all static MAC addresses belonging to this VLAN).
314
Table 4-8. Address Table Commands
Function
Displays the statically configured multicast addresses.
Displays the multicast filtering configuration.
Displays the current dynamic addresses in locked ports.
Interface Configuration (VLAN) mode command adds a
mac-address {
ethernet
permanent
[mac-address]
The address can only be deleted by the
— The address is deleted after reset.
The address is deleted after "age out" time has
— The address is deleted after the port changes mode to unlock
command). This parameter is only available
no port security
form of the command without specifying a MAC address deletes
interface |
port-channel
| |
delete-on-reset delete-on-timeout
Mode Page
UE 4-328
UE 4-329
PE 4-330
PE 4-331
|
no bridge address