Power Inline Powered-Device - Alcatel OmniStack LS 6248 User Manual

Related Commands

power inline powered-device

power inline priority
power inline usage-threshold
show power inline
power inline powered-device
The
power inline powered-device
command adds a comment or description of the powered device type to enable the
user to remember what is attached to the interface. To remove the description, use
the form of this command.
no
Syntax
power inline powered-device
no power inline powered-device
Parameters
• pd-type
—
(Range: 1-24 characters).
Default Setting
This command has no default configuration.
Command Mode
Interface Configuration (Ethernet) mode
Command Usage
There are no user guidelines for this command.
Example
The following example configures a description to an IP-phone to a powered device
connected to Ethernet interface 1/e1.
Console(config)# interface ethernet 1/e1
Console(config-if)#
Related Commands
power inline
power inline priority
power inline usage-threshold
show power inline
Interface Configuration (Ethernet) mode
pd-type
Specifies the type of powered device attached to the interface
power inline powered-device
Power over Ethernet Commands
IP-phone
4
461