Command Groups; Commands - Alcatel OmniStack LS 6248 User Manual

Command Groups

The system commands can be broken down into the functional groups shown below
Command Group
802.1x Commands
AAA Commands
ACL Commands
Address Table

Commands

LLDP Commands
Clock Commands
Configuration and Image
File Commands
Ethernet Configuration
Commands
GVRP Commands
IGMP Snooping
Commands
IP Addressing Commands Configures and manages IP addresses on the device.
LACP Commands
Line Commands
Management ACL
Commands
PHY Diagnostics
Commands
Port Channel Commands Configures and displays Port channel information.
Port Monitor Commands
Power over Ethernet
Commands
QoS Commands
RADIUS Commands
RMON Commands
SNMP Commands
Spanning-Tree
Commands
SSH Commands
Syslog Commands
Table 4-4. Command Groups
Description
Configures Port based authentication for authenticating system users
on a per-port basis via a external server.
Configures connection security including authorization and passwords.
Configures and displays ACL information.
Configures bridging address tables.
Configures AMAP protocol for discovering adjacent switches by
sending and receiving AMAP "Hello" packets on active Spanning Tree
ports.
Configures system time parameters for both the local hardware clock
and the external SNTP clock.
Manages the device configuration files.
Configures all port configuration options for example ports, storm
control, port speed and auto-negotiation.
Configures and displays GVRP configuration and information.
Configures IGMP snooping and displays IGMP configuration and
IGMP information.
Configures and displays LACP information.
Configures the console and remote Telnet connection.
Configures and displays management access-list information.
Diagnoses and displays the interface status.
Monitors activity on specific target ports.
Configuring PoE interfaces, including the interface PoE operation
status and the interface's power consumption.
Configures and displays QoS information.
Configures and displays RADIUS information.
Displays RMON statistics.
Configures SNMP communities, traps and displays SNMP information.
Configures and reports on Spanning Tree protocol.
Configures SSH authentication.
Manages and displays syslog messages.
4
Command Groups
Page
4-263
4-288
4-300
4-313
4-333
4-348
4-365
4-376
4-399
4-408
4-418
4-431
4-437
4-445
4-451
4-455
4-458
4-460
4-467
4-495
4-503
4-518
4-538
4-580
4-591
261
.