Service-Acl; Show Access-Lists - Alcatel OmniStack LS 6248 User Manual

4
Command Line Interface

service-acl

The Interface Configuration mode command applies an ACL to the input
service-acl
interface. To detach an ACL from an input interface, use the
command.
Syntax
{
service-acl
no service-acl
Parameters
• acl-name — Specifies the ACL to be applied to the input interface.
Default Setting
This command has no default configuration.
Command Mode
Interface (Ethernet, port-channel) Configuration mode.
Command Usage
In advanced mode, when an ACL is bound to an interface, the port trust mode
is set to trust L2-L3 and not to L2.
Example
The following example, binds (services) an ACL to port 1/e16.
Console(config)#
Console(config-if)#
Related Commands
show interfaces access-lists

show access-lists

The
show access-lists
lists (ACLs) defined on the device.
Syntax
show access-lists
Parameters
• name — Name of the ACL.
Default Setting
This command has no default configuration.
Command Mode
Privileged EXEC mode
Command Usage
There are no user guidelines for this command.
310
acl-name}
input
{ }
input
interface ethernet
service-acl input
Privileged EXEC mode command displays access control
[name]
no
1/e16
macl1
form of this