Sntp Anycast Client Enable; Sntp Client Enable (Interface) - Alcatel OmniStack LS 6248 User Manual

sntp client poll timer

sntp anycast client enable

sntp unicast client enable
sntp unicast client poll
sntp anycast client enable
The
sntp anycast client enable
anycast client. To disable the SNTP anycast client, use the
command.
Syntax
sntp anycast client enable
no sntp anycast client enable
Default Setting
The SNTP anycast client is disabled.
Command Mode
Global Configuration mode
Command Usage
Use the

sntp client enable (Interface)

to enable the SNTP client on a specific interface.
Example
The following example enables SNTP anycast clients.
console(config)#
Related Commands
sntp authentication-key
sntp authenticate
sntp trusted-key
sntp client poll timer
sntp broadcast client enable
sntp unicast client enable
sntp unicast client poll
sntp client enable (Interface)
The
sntp client enabl
command enables the Simple Network Time Protocol (SNTP) client on an interface.
This applies to both receive broadcast and anycast updates. To disable the SNTP
client, use the no form of this command.
Global Configuration mode command enables SNTP
sntp anycast client enable
e Interface Configuration (Ethernet, port-channel, VLAN) mode
no
Interface Configuration mode command
Clock Commands
form of this
357
4