Snmp-Server Group - Alcatel OmniStack LS 6248 User Manual

Example
The following example creates a view that includes all objects in the MIB-II system
group except for sysServices (System 7) and all objects for interface 1 in the MIB-II
interface group.
Console(config)#
Console(config)#
Console(config)#
Related Commands
show snmp
show snmp views

snmp-server group

The
snmp-server group
Simple Management Protocol (SNMP) group or a table that maps SNMP users to
SNMP views. To remove a specified SNMP group, use the
Syntax
snmp-server group
notifyview
] } [read
no snmp-server group
Parameters
• groupname — Specifies the name of the group.
• v1 — Indicates the SNMP Version 1 security model.
• — Indicates the SNMP Version 2 security model.
v2
• — Indicates the SNMP Version 3 security model.
v3
• — Indicates no authentication of a packet. Applicable only to the
noauth
SNMP Version 3 security model.
• — Indicates authentication of a packet without encrypting it. Applicable
auth
only to the SNMP Version 3 security model.
• — Indicates authentication of a packet with encryption. Applicable only
priv
to the SNMP Version 3 security model.
• readview — Specifies a string that is the name of the view that enables only
viewing the contents of the agent. If unspecified, all objects except for the
community-table and SNMPv3 user and access tables are available.
• writeview — Specifies a string that is the name of the view that enables
entering data and configuring the contents of the agent. If unspecified,
nothing is defined for the write view.
• notifyview — Specifies a string that is the name of the view that enables
specifying an inform or a trap. If unspecified, nothing is defined for the notify
view. Applicable only to the SNMP Version 3 security model.
Default Setting
No group entry exists.
snmp-server view
snmp-server view
snmp-server view
Global Configuration mode command configures a new
groupname
{v1 | v2 | v3 {noauth | auth | priv} [notify
readview
] [write
groupname
user-view system
user-view system.7
user-view ifEntry.*.1
no
writeview
]
{v1 | v2 | v3 [noauth | auth | priv]}
SNMP Commands
included
excluded
included
form of this command.
4
521