Ip Source-Guard Binding - Alcatel OmniStack LS 6248 User Manual

Default Configuration
IP source guard is disabled.
Command Mode
Interface Configuration (Ethernet, Port-channel) mode
User Guidelines
There are no user guidelines for this command.
Example
The following example globally enables the IP source guard on port 1/e16.
Console # (config)# interface ethernet 1/e16
Console # (config-if)# ip source-guard
Console # (config-if)#

ip source-guard binding

The ip source-guard binding Global Configuration mode command configures the
static IP source bindings on the switch. To delete static bindings, use the no form of
this command.
Syntax
ip source-guard binding mac-address vlan-id ip-address {ethernet interface
| port-channel port-channel-number}
no ip source-guard binding mac-address vlan-id
Parameters
• mac-address — Specifies a MAC address.
• vlan-id — Specifies a VLAN number.
• ip-address — Specifies an IP address.
• interface — Specifies an Ethernet port.
• port-channel-number — Specifies the Port-channel number.
Default Configuration
No static binding exists.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
DHCP Snooping, IP Source Guard and ARP Inspection Commands
4
641